A highly tuned compound power lead. This lead has simplified wiring when compared to the ReVive lead above, and lacks the top of the range Furutech IEC plug. This lead does feature the latest Furutech 13Amp Rhodium plated mains plug. Nominal length 1.8m.
A highly tuned compound power lead with cryogenic treatment. This cable features the top of the range Furutech FI50 Rhodium plated IEC plug, and UK 13Amp Rhodium plated mains plug. The lead is a nominal 1.8m.
Our best selling power distribution block, the ReFlex ‘Lite’ provides a cost effective approach to accessing the coherence that a MusicWorks mains block brings to a system. This 6 way block features acrylic sandwich construction, star earthing and the same mains sockets that are used on the full ReFlex Plus.
Power inlet is via an IEC socket, allowing the customer to optimise the power supply to the block.
“We added the £600 MusicWorks ReFlex 6-way mains block, leaving everything else alone,and went back to the music. Tighter, more tuneful bass and better timing gave an improved sense of musical flow, but it wasn’t just the bottom end that improved; there was more feeling of life, a suggestion of vibrancy missing from the vanilla setup. Nina Simone was perkier, the Tord Gustavsen Trio had more tension and a sense of poise that had been absent previously. Nor were we micro-analysing these effects. If you can appreciate the benefits of hifi separates at all, you’d easily hear this.” - Courtesy Hi Fi Plus issue 63
The ultimate expression of what we know about power distribution. The Ultra is totally a re-engineered version of the ReFlex Plus power distribution block. Driven by our understanding of what contributes noise to audio (and a/v) systems, as well as re-engineering the critical ‘star earth’, the contribution brought by this block needs to be experienced first hand. Note: limited distribution of this product means that it only available through The AudioWorks and Blade Audio at present.
The block provides an outlet for up to 6 pieces of equipment. All wiring and sockets are carefully chosen and then cryogenically treated.
To allow optimal choice of power lead for the application, the block is equipped with an IEC socket.
Noise in the form of microphony (mechanical to ellectrical noise conversion) affects every component in a system, including the cabling. The ReBound is primarily designed to allow mechanical energy in system cabling to be managed effectively. They can be used to advantage on power, signal and speaker cables.The ReBound is available in two cable size fittings:
ReBound A – Suitable for large diameter cables up to 17mm in diameter.
ReBound C – Suitable for cables up to 10mm diameter.
Two modes of use can be adopted:
Cable damping – a single cable is threaded through the ReBound (as illustrated).
Cable Coupling – two cables can be damped and coupled mechanically using a single ReBound or, more effectively an ‘inverted pair’ of ReBounds. Cable coupling can bring significant advantages to system ‘timing’ as well as bringing the benefits of lower apparent background hash.
“The ReVo rids the system of any sense of metallic ringing or harshness. It gets rid of the congestion and confusion that sometimes plague systems, as the review says “everything becomes more intelligible.” And by everything, the MusicWorks people do mean ‘everything’; the ReVo has transformed the sound of everything from a pair of Creek products to a Spectral preamp… and beyond. Like any good piece of hi-fi, once you try it, there’s no going back and conventional tables sound smeared and tuneless by comparison. ” – > Hi Fi Plus Awards issue 2009 – Winner Stands and Tables of the Year
Designed to accommodate equipment that performs at the highest levels, the ReVo 3 has adjustable support brackets that allow equipment to be supported either on its feet, or directly on it’s case work.
Front / Rear Panel 15mm Acrylic, Centre Panel 10mm Acrylic. Support brackets 15mm acrylic. Spars 20mm acrylic. Bolts M12 Acrylic. Drawing of ReVo3
Having the same dimensions as the ReVo 3 table, the ‘Lite’ version is simplified to provide a significant degree of what the ReVo 3 table achieves.
Supporting 3 pieces of standard width equipment either on the equipment feet, or directly on the casework. The ‘Lite’ features 10mm front and rear panels with no intermediate panel. Brackets for equipment support are 10mm. The table is assembled using 10mm stainless steel bolts.
Converts a 3 level ReVo table to a 4 level table. The ReDouble allows one of the inner levels of the ReVo 3 table to be converted to house two levels of slimline products. Either the top or bottom space can be converted to allow two pieces of equipment up to 12cm high to be accommodated.
A second ReDouble can be added to allow 5 levels of equipment to be housed.
Designed to provide an optimal platform for high performance larger floorstanding loudspeakers, the ReSponse also provides an excellent isolation sub-table for equipment.
When used a a floorstanding speaker isolator, the response can provide a better termination for the speaker than spikes. The sense of freedom, speed and harmonic integrity provided by the use of the stands is clearly audible, giving the ‘transparency’ of a standmount speaker while keeping the authority of a floorstander.
As an equipment isolator, the ReSponse stand will effectively isolate equipment from floor borne vibrations. As an equipment sub-table the ReSponse will help isolate equipment from the inevitable resonances and colourations of glass or wooden shelving.
The ReSponse Stand is supplied with a cross spar and two isolation brackets. Additional brackets are available for further isolation. Additional brackets are £65 each.
The ReSponse L is 57cm wide and suitable for loudspeakers up to 42cm wide. Spar length 25cm, 33cm or 49cm.
Designed to provide an optimal platform for high performance floorstanding loudspeakers, the ReSponse also provides an excellent isolation sub-table for equipment.
When used a a floorstanding speaker isolator, the response can provide much better termination for the speaker than spikes. The sense of freedom, speed and harmonic integrity provided by the use of the stands is clearly audible, giving the ‘transparency’ of a standmount speaker while keeping the authority of a floorstander. The standard support (S) is suitable for speakers with widths of up to 30cm. Larger speakers up to 40cm wide can be accommodated by the large version of the stand. Supplied with a 33cm cross spar as standard and 2 support brackets per speaker.
As an equipment isolator, the ReSponse stand will effectively isolate equipment from floor borne vibrations. As an equipment sub-table the ReSponse will help isolate equipment from the inevitable resonances and colourations of glass or wooden shelving.
The ReSponse Stand is supplied with a cross spar and two isolation brackets. Additional brackets are available for further isolation. Each additional bracket is £50.
The ReSponse S is 42cm wide and suitable for loudspeakers up to 26cm wide. Spar lengths are 25cm, 33cm, or 49cm.
Priced to allow everyone to put a little bit of MusicWorks ‘magic’ into their system. The ReSponse mini is fabricated from laser cut 8mm acrylic, and is ideal as an equipment isolator for audio or a/v equipment. If your hi fi component is resting on a high priced hi fi rack, or on a basic piece of furniture (or even on the floor), a ReSponse mini can make a substantial improvement to the performance.
Dimensions: Brackets (front and rear) 38cm wide x 3.5cm high. Nominal 20cm central spar (10mm) allows the brackets to be flexibly spaced for optimum equipment support.
A stylish high performance speaker stand made of shaped laser cut acrylic. Each RePlica Lite is a 2 part interlocking stand raising the speaker a nominal 60cm in height This stand is recommended for mid sized bookshelf speakers up to 10 Kg.
Designed to provide an optimal platform for high performance stand mount loudspeakers. The design of the stand is based on the ReVo table and takes the performance of acrylic speaker stands to a new level. The stand comprises 3 interlocking pieces made of 15mm thick laser cut acrylic. Stand height stand is 60cm.
A revolutionary 100% acrylic equipment table capable of supporting 2 pieces of standard width equipment. Movable support brackets allow equipment to be optimally supported, either on the equipment’s own feet or on the casework. The table is available in a choice of 2 depths, 35cm or 46cm.